magicJack  and magicJack Plus Support, Reviews, FAQs and Hacks Forum Index

magicJack and magicJack Plus Support, Reviews, FAQs and Hacks


magicJack and magicJack Plus Unofficial Technical Support. Your Magic Jack and Magic Jack Plus phone service information resource
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Thin Client/MJ upgrade - "No output/input audio devices


Goto page 1, 2  Next
 
Post new topic   Reply to topic    magicJack and magicJack Plus Support, Reviews, FAQs and Hacks Forum Index -> Using magicJack on a Thin Client
View previous topic :: View next topic  
Author Message
stroths
Dan isn't smart enough to hire me


Joined: 02 Apr 2008
Posts: 470
Location: Dallas, TX

PostPosted: Wed Jun 11, 2008 9:23 pm    Post subject: Reply with quote

Stewart wrote:
I don't have a thin client, so can't troubleshoot the problem.

However, this may work to downgrade:
1. Kill MJ app.
2. Get the old version from http://upgrade.talk4free.com/upgrade/20071214000001/upgrade.exe .
3. Rename (or otherwise save and delete) the mjusbsp folder, typically C:\Documents and Settings\username\Application Data\mjusbsp .
4. Save and delete any files in C:\Documents and Settings\username\Local Settings\Application Data\magicJack\UpdateDownload .
5. Add a hosts file entry:
Code:
0.0.0.0 upgrade.talk4free.com
Of course, you will have to remove this entry if you need to download other updates.
6. Flush DNS cache.
7. Run the upgrade file.
8. Registration screen will appear. If if says 'no serial number passed', hit cancel and double click the status area. Repeat a couple of times if needed, until phone # appears.
9. Enter user name and password.
10. With luck, it will show Ready to Call.


You are a genius Stewart...worked like a charm. Here is a little more detail for the newbies out there

1. Ctrl-Alt-Del, go to the processes tab select magicjack.exe and choose "end task" and do the same for mjsetup.exe if it exists.
2-4. Nothing extra to add
5. Click start and choose Run. Type in Notepad.exe. When in notepad, do File, Open and browse to C:\windows\system32\drivers\etc\. Open a file called hosts. Make your entry and save it.
6. Click Start, Run and type in CMD and click ok. Type ipconfig /flushdns
7-10. Nothing extra to add
Back to top
View user's profile Send private message
kconaty
magicJack Apprentice


Joined: 16 Dec 2007
Posts: 27

PostPosted: Wed Jun 11, 2008 9:29 pm    Post subject: Reply with quote

That worked. I guess this workaround will suffice until somebody comes up with a permanent solution. Thanks so much. I still wonder why it works on my laptop. I probably should apply the same settings to my laptop so it doesn't upgrade.
Back to top
View user's profile Send private message
stroths
Dan isn't smart enough to hire me


Joined: 02 Apr 2008
Posts: 470
Location: Dallas, TX

PostPosted: Wed Jun 11, 2008 9:36 pm    Post subject: Reply with quote

kconaty wrote:
That worked. I guess this workaround will suffice until somebody comes up with a permanent solution. Thanks so much. I still wonder why it works on my laptop. I probably should apply the same settings to my laptop so it doesn't upgrade.


I am glad that fixed it for you too. Make sure you commit the changes so they will stay.
Back to top
View user's profile Send private message
kconaty
magicJack Apprentice


Joined: 16 Dec 2007
Posts: 27

PostPosted: Wed Jun 11, 2008 10:17 pm    Post subject: Reply with quote

ahhhh....It's doing it again.
Back to top
View user's profile Send private message
lcompton
Dan isn't smart enough to hire me


Joined: 01 Jun 2008
Posts: 283
Location: Exton, Pennsylvania, United States

PostPosted: Wed Jun 11, 2008 10:22 pm    Post subject: Attempting to Downgrade the HP T5710 Thin Client Reply with quote

Good evening.

Thank you for posting this process for downgrading the magicJack to the previous (and functioning) version of the software.

Unfortunately, in my case, the Thin Client doesn't downgrade successfully. When executing step seven (7), the upgrade runs and then the softphone appears with the phrase "Starting, please wait..." in the status window. That's it. Everything stops at that point.

In other news, I am thinking that the software upgrade broke compatibility with the audio driver used in the Thin Client. I'm trying to find an alternate driver, but nothing yet.

Thank you again,

Lisa Smile
Back to top
View user's profile Send private message Yahoo Messenger
maine-iac
Dan isn't smart enough to hire me


Joined: 25 Mar 2008
Posts: 347
Location: GA

PostPosted: Wed Jun 11, 2008 10:28 pm    Post subject: Reply with quote

In a strange sort of way, I am glad to see all the problems here with the thin client. I just received mine yesterday and was trying to set it up today when I started having all of these problems. Now at least I know it wasn't me causing the problems on my end!

Over on DSL Reports, it was noted that the MJ upgrade will not work without a sound card installed. I can verify that the same MJ I have will work with my desktop and laptop which both have sound cards and drivers, while the thin client does not.
Back to top
View user's profile Send private message
lymon
Dan isn't smart enough to hire me


Joined: 31 May 2008
Posts: 164

PostPosted: Thu Jun 12, 2008 12:40 am    Post subject: Reply with quote

This is going to make the decision to return the MJ REAL easy. If I can't run it on my thin client I ain't gonna run it. Thanks for nothing Dan.

So, what other fun things can be done with a T5700?
Back to top
View user's profile Send private message
kconaty
magicJack Apprentice


Joined: 16 Dec 2007
Posts: 27

PostPosted: Thu Jun 12, 2008 6:44 am    Post subject: Reply with quote

tried to reinstall the downgrade, it hangs at the registration screen and won't connect. I hope somebody finds a solution. The whole reason that I got the TC was to run the magicjack
Back to top
View user's profile Send private message
bneuman
Dan isn't smart enough to hire me


Joined: 01 Jan 2008
Posts: 136
Location: Baldwinsville, NY

PostPosted: Thu Jun 12, 2008 7:16 am    Post subject: Reply with quote

kconaty wrote:
tried to reinstall the downgrade, it hangs at the registration screen and won't connect. I hope somebody finds a solution. The whole reason that I got the TC was to run the magicjack


I just read over on another forum that the registration servers are down....
Back to top
View user's profile Send private message
lcompton
Dan isn't smart enough to hire me


Joined: 01 Jun 2008
Posts: 283
Location: Exton, Pennsylvania, United States

PostPosted: Thu Jun 12, 2008 8:54 am    Post subject: Re: Attempting to Downgrade the HP T5710 Thin Client Reply with quote

lcompton wrote:
Good evening.

Thank you for posting this process for downgrading the magicJack to the previous (and functioning) version of the software.

Unfortunately, in my case, the Thin Client doesn't downgrade successfully. When executing step seven (7), the upgrade runs and then the softphone appears with the phrase "Starting, please wait..." in the status window. That's it. Everything stops at that point.

In other news, I am thinking that the software upgrade broke compatibility with the audio driver used in the Thin Client. I'm trying to find an alternate driver, but nothing yet.

Thank you again,

Lisa Smile


Good morning.

This morning, I attempted to access my magicJack account (via my.magicjack.com) and was unable to reach it suggesting to me that there may have been more issues with magicJack than originally thought. My plan was to forward my incoming magicJack calls to my wireless telephone until I worked through the magicJack software upgrade/HP T5710 Thin Client incompatibility.

A short while later (about 0815 EDT) I attempted to access my magicJack account page again and was presented with a login page. This made me think that I might be able to get through the rest of the downgrade process detailed earlier in this topic. So, I attempted to pick up at step eight (8 ), having left off at step seven (7) last evening. Fortunately, this time I was able to get to a valid registration screen, enter my user ID and password, and get the magicJack to a "Ready to Call" state.

At this time, my magicJack/HP T5710 Thin Client are functioning satisfactorily at a magicJack software release (version unknown) prior to yesterday's software release/upgrade.

CRITICAL ADVICE TO ANYONE READING THIS WHO HAS NOT UPGRADED
Add the following line (from step five (5) earlier in this topic) to your hosts file at C:\WINDOWS\system32\drivers\etc\hosts


Code:
0.0.0.0 upgrade.talk4free.com


Remember to commit the change prior to reboot.

This statement will prevent the magicJack from finding the upgrade server, which will inhibit the upgrade from running on your Thin Client. This statement will need to remain until a fix has been found for the audio-device-not-found problem.


In other news, I have reason to believe that the incompatibility of the magicJack software upgrade may be at the hardware level, which could prove extremely difficult to overcome. The new version of the magicJack software appears to require a sound sub-system of some type. Since it is not possible to uninstall the sound sub-system in the Thin Client, replacing the sound sub-system with a potentially-compatible sound controller (such as inserting a SoundBlaster in the PCI expansion slot) is not likely to prove effective. I'll have more time over the weekend to study this issue and post anything I learn.

Thank you,

Lisa Smile
Back to top
View user's profile Send private message Yahoo Messenger
bneuman
Dan isn't smart enough to hire me


Joined: 01 Jan 2008
Posts: 136
Location: Baldwinsville, NY

PostPosted: Thu Jun 12, 2008 9:06 am    Post subject: Reply with quote

Looks like registration servers came back up at 8:05am Eastern time...
Back to top
View user's profile Send private message
bradbuser
MagicJack Newbie


Joined: 23 Feb 2008
Posts: 6

PostPosted: Thu Jun 12, 2008 10:26 am    Post subject: Reply with quote

Good to know I'm not as incompetent as I thought. I had previously set up my MJ and t5700 and everything worked fine, but last night I installed a new router and thought it was causing a problem. Come find out the problems are because of this update. To complicate matters, I'm one of the brave ones who is using a 192/256 t5700 and was barely scraping by on hard drive space. Hopefully that doesn't doesn't cause more problems. It was working fine before, hopefully I can get this fix to work this evening...
Back to top
View user's profile Send private message
kulumbaa
MagicJack Contributor


Joined: 26 Apr 2008
Posts: 57

PostPosted: Thu Jun 12, 2008 10:32 am    Post subject: Reply with quote

i hope this is a temporary problem i cant seem to get any incoming calls even though i have not upgraded. i just added the line to the host file and cycled my thin client i dont see any popups yet asking about audio devices.

the brilliant peeps at MJ just had to screw things up.
Back to top
View user's profile Send private message
kulumbaa
MagicJack Contributor


Joined: 26 Apr 2008
Posts: 57

PostPosted: Thu Jun 12, 2008 11:06 am    Post subject: Reply with quote

Well thankfully i can receive incoming calls again, what a nuisance... hang in there TC crew
Back to top
View user's profile Send private message
dzex
MagicJack Newbie


Joined: 25 May 2008
Posts: 2

PostPosted: Thu Jun 12, 2008 7:43 pm    Post subject: Works, but buggy... Reply with quote

This upgrade rollback works but, it seems to me, the update itself is REALLY old and contains some old bugs.
The first one I have found immediately: redial - magicjack sometimes misses tones when I use redial,
never had this problem before and it is quite annoying issue for me Sad ...

Anyway, I wonder if anyone has or can point to a newer upgrade that would fix "not found audio devices"
problem alone with redial trouble?
Back to top
View user's profile Send private message
kulumbaa
MagicJack Contributor


Joined: 26 Apr 2008
Posts: 57

PostPosted: Thu Jun 12, 2008 7:50 pm    Post subject: Re: Works, but buggy... Reply with quote

dzex wrote:
This upgrade rollback works but, it seems to me, the update itself is REALLY old and contains some old bugs.
The first one I have found immediately: redial - magicjack sometimes misses tones when I use redial,
never had this problem before and it is quite annoying issue for me Sad ...

Anyway, I wonder if anyone has or can point to a newer upgrade that would fix "not found audio devices"
problem alone with redial trouble?



Stewart wrote in another post:

It appears that users are now being downgraded to http://upgrade.talk4free.com/upgrade/20071221000000/upgrade.exe .

If you are having trouble with the upgrade, restart your MJ and it should download this automatically. Or, you can install it yourself.

If you modified your hosts file to prevent upgrades, you will of course have to undo that first.
Back to top
View user's profile Send private message
mozerd
MagicJack Contributor


Joined: 05 Jun 2008
Posts: 52
Location: Nepean ON Canada

PostPosted: Fri Jun 13, 2008 10:25 am    Post subject: Re: Works, but buggy... Reply with quote

kulumbaa wrote:
Stewart wrote in another post:
It appears that users are now being downgraded to http://upgrade.talk4free.com/upgrade/20071221000000/upgrade.exe .
If you are having trouble with the upgrade, restart your MJ and it should download this automatically. Or, you can install it yourself.
If you modified your hosts file to prevent upgrades, you will of course have to undo that first.

The downgrade file in my situation appears to be the same recent update --- the file I now get when I went through the process quoted above generates the same error condition on my HP T5710 TC magicJack complains that it cannot find the audio stuff.

If anyone can provide a link to a working upgrade.exe that installs the proper drivers for the handset and the headset that would be great.

BTW, no problem with the most recent update when running majicJack from my desktop or laptop -- my issue is strictly with the HP T5710 TC.
Back to top
View user's profile Send private message Visit poster's website
viafax999
magicJack Apprentice


Joined: 21 Apr 2008
Posts: 10

PostPosted: Fri Jun 13, 2008 11:01 am    Post subject: Reply with quote

Thanks for the info on how to revert and also how prevent the unsolicited upgrade.
received another upgrade this morning that did not fix the "no audio devices" issue. Your revert procedures worked with no problem and I am back with the MJ runinng on a Windows 2003 standard server.

Again many thanks Peter
Back to top
View user's profile Send private message
bradbuser
MagicJack Newbie


Joined: 23 Feb 2008
Posts: 6

PostPosted: Fri Jun 13, 2008 2:12 pm    Post subject: Reply with quote

The upgrade and then downgrade has jacked everything up for me. Only days before the upgrade came out I had my 192/256 TC running without a hitch. Obviously the upgrade ruined that, and so I've started over and reflashed my TC and stripped it back down to barebones running all of the uninstall files, etc. Now when I go to install the MJ it can get partially downloaded and installed, but won't install the USB drivers. It just keeps asking for a location and I figured it should be on the MJ. I suppose I'm wondering if anyone has ever had a similar problem or is using a 192/256 t5700 and has run into a similar issue. For me it's not adding up. If they reverted back to a previous install file it would seem my equipment should load up. Maybe my install files on the MJ are corrupt? Help... please.
Back to top
View user's profile Send private message
kconaty
magicJack Apprentice


Joined: 16 Dec 2007
Posts: 27

PostPosted: Fri Jun 13, 2008 3:24 pm    Post subject: Reply with quote

No 911 footer on the manual downgrade; anybody else and do you think that 911 service is out?
Back to top
View user's profile Send private message
Nytefire
MagicJack Contributor


Joined: 10 Jun 2008
Posts: 50
Location: Indiana, USA

PostPosted: Fri Jun 13, 2008 3:27 pm    Post subject: Reply with quote

kconaty wrote:
No 911 footer on the manual downgrade; anybody else and do you think that 911 service is out?

Yes, it's currently out for everyone - as of 15:26 EDT, Friday June 13, 2008.
Back to top
View user's profile Send private message Send e-mail
maine-iac
Dan isn't smart enough to hire me


Joined: 25 Mar 2008
Posts: 347
Location: GA

PostPosted: Fri Jun 13, 2008 11:41 pm    Post subject: Reply with quote

I still get the "no audio devices" message on the thin client. Is that the issue with everyone or did I miss the fix reading through here somewhere? I am beginning to wonder if this was a deliberate sabotage to make MJ not work on the thin client for some reason.
Back to top
View user's profile Send private message
HolmanGT
MagicJack Sensei


Joined: 08 Jan 2008
Posts: 1127
Location: Saint George, UT

PostPosted: Sat Jun 14, 2008 1:33 am    Post subject: Reply with quote

maine-iac wrote:
I still get the "no audio devices" message on the thin client. Is that the issue with everyone or did I miss the fix reading through here somewhere? I am beginning to wonder if this was a deliberate sabotage to make MJ not work on the thin client for some reason.



Ah "Great minds..."

But I am not sure why someone would want to do that not to mention its lack of ethical conduct. After all it is just another very quiet XP machine.


[Edit] Has anyone used the new upgrade on a thin client and gotten it to work?
Back to top
View user's profile Send private message
witsend
MagicJack Newbie


Joined: 26 May 2008
Posts: 5

PostPosted: Sat Jun 14, 2008 7:51 pm    Post subject: solved Reply with quote

dont know if this applies to the thin cliant or not, but i had the same issue on my striped machine with no sound card. i just installed sp2 than shut off firewall and other virus add ons and it works great again even with there upgrade.
just thought i would post
Back to top
View user's profile Send private message
HolmanGT
MagicJack Sensei


Joined: 08 Jan 2008
Posts: 1127
Location: Saint George, UT

PostPosted: Sat Jun 14, 2008 11:23 pm    Post subject: Re: solved Reply with quote

witsend wrote:
dont know if this applies to the thin cliant or not, but i had the same issue on my striped machine with no sound card. i just installed sp2 than shut off firewall and other virus add ons and it works great again even with there upgrade.
just thought i would post



This Posting editor just dropped my reply again, actually good for you witsend. Laughing

The short version is THANK YOU for your post. Now we know it is not just the thin clients but something to do with lean and mean machines.

I was so bewildered by it I actually had given up and gone out and mowed the law - "That is desperation" - But now you have put the wind at my back and I am ready to give it another go.

Regards,
Back to top
View user's profile Send private message
maine-iac
Dan isn't smart enough to hire me


Joined: 25 Mar 2008
Posts: 347
Location: GA

PostPosted: Mon Jun 16, 2008 4:23 pm    Post subject: Reply with quote

I don't know what happened and I don't know what I did. But I put my thin client away last Friday evening with it not working. Today I plugged everything back up and, Lo and Behold, the dumb thing is working! Making and receiving calls and even ringing. Last week I was trying to set up my thin client when all of the upgrade mess was taking place and never had a working configuration. I tried some of the work arounds on this forum to get it to work. I don't know what the difference is between last Friday and today, but for right now, this minute, it is working. I think the upgrade that is finally working is the version dated Dec 21, 2007, no. 1.73.415.3.
Back to top
View user's profile Send private message
HolmanGT
MagicJack Sensei


Joined: 08 Jan 2008
Posts: 1127
Location: Saint George, UT

PostPosted: Mon Jun 16, 2008 4:43 pm    Post subject: Reply with quote

maine-iac wrote:
I don't know what happened and I don't know what I did. But I put my thin client away last Friday evening with it not working. Today I plugged everything back up and, Lo and Behold, the dumb thing is working! Making and receiving calls and even ringing. Last week I was trying to set up my thin client when all of the upgrade mess was taking place and never had a working configuration. I tried some of the work arounds on this forum to get it to work. I don't know what the difference is between last Friday and today, but for right now, this minute, it is working. I think the upgrade that is finally working is the version dated Dec 21, 2007, no. 1.73.415.3.


maine-iac,

Look for a post by Stewart and/or stroths for a method of preventing the upgrade from reinstalling, it is just a host file edit. Glad it is working for you.
Back to top
View user's profile Send private message
maine-iac
Dan isn't smart enough to hire me


Joined: 25 Mar 2008
Posts: 347
Location: GA

PostPosted: Mon Jun 16, 2008 7:33 pm    Post subject: Reply with quote

I followed those instructions last week as I was trying to set up the thin client. Then it didn't work because of all the problems with the upgrade. That's why I am surprised to see it working today.
Back to top
View user's profile Send private message
HolmanGT
MagicJack Sensei


Joined: 08 Jan 2008
Posts: 1127
Location: Saint George, UT

PostPosted: Mon Jun 16, 2008 11:27 pm    Post subject: Reply with quote

maine-iac wrote:
I followed those instructions last week as I was trying to set up the thin client. Then it didn't work because of all the problems with the upgrade. That's why I am surprised to see it working today.


maine-iac,

You are not alone with "my MJ just suddenly started working phenomenon. I think maybe as much as 30% of the problems I have chased on the MJ when I have enough sense to quit, go to bed and tackle it again it the morning, come morning are gone. I am a bit of a night owl, and unfortunately I think that MJ Engineering does a lot of their testing in the wee-hours which ends up with the two of us butting heads. Wink
Back to top
View user's profile Send private message
maine-iac
Dan isn't smart enough to hire me


Joined: 25 Mar 2008
Posts: 347
Location: GA

PostPosted: Tue Jun 17, 2008 12:14 am    Post subject: Reply with quote

Well, I will have another opportunity to setup my thin client soon. When I bought the client I also ordered a 512MB flash from Transcend and that should be here shortly. I want to set that up from scratch using info from this forum and see if I can repeat my success. I won't be erasing the original 256MB flash until I get it working again!
Back to top
View user's profile Send private message
mozerd
MagicJack Contributor


Joined: 05 Jun 2008
Posts: 52
Location: Nepean ON Canada

PostPosted: Fri Jun 20, 2008 3:03 pm    Post subject: T5710 Solution -- IT Works Reply with quote

This was tested and you can read the result of that test in the following link:

Thin Clients / MagicJack / Future Upgrades?
Back to top
View user's profile Send private message Visit poster's website
mobybit
MagicJack Newbie


Joined: 29 Jun 2008
Posts: 1

PostPosted: Mon Jul 14, 2008 4:03 pm    Post subject: From MJ tech support ... Reply with quote

Just had this chat with MJ tech support :

Please wait for a site operator to respond.

All operators are currently assisting others. Thanks for your patience. An operator will be with you shortly.

All operators are currently assisting others. Thanks for your patience. An operator will be with you shortly.

You are now chatting with 'Dana'

Dana: Hello, how may I help you?

tom: hello

tom: Why can't I select "Telephone" in the MagicJack menu "Volume/Headset control", "Choose your device" ?

Dana: Please wait while I check that for you

Dana: Please click the link to download and run the magicJack upgrade (applicable for both XP & Vista):

Dana: http://upgrades.magicjack.com/upgrade/upgrade.exe

Dana: ANd then

Dana: On your softphone, please click on Menu then Advance Users then Restart. After that, please unplug your magicJack then plug it back in after 15 seconds.

tom: Already ran the upgrade.exe and restarted MagicJack softphone.

Dana: ok

Dana: Please go to �My computer� and locate the drive named Vista Only, Phone, or removable disk (make sure it is the magicJack drive). Right click that drive, click format, and click start. Unplug magicJack, wait 15 seconds, and plug magicJack back in. You will need to download the magicjack upgrade again.

tom: I actually found out the solution after Googling for help.

Dana: Please plug in your MJ into USB port and then try the above step '

tom: The answer is that since I'm using RDP I have to have �Remote computer sound� set to �Leave at remote computer� in the Remote Desktop Connection properties �Local Resources� tab.

Dana: Thank you for your patience. I will transfer you to a higher level of support. Please hold while I transfer you.

Please wait while I transfer the chat to the best suited site operator.

You are now chatting with 'Jenny'

Jenny: Hi Tom!

tom: hello

Jenny: Please do allow me to review your previous chat session.

tom: ok

Jenny: Tom, may I know if you can select Telephone now please?

tom: Yes, after setting the proper options in the RDP client

tom: So, is there a way to use RDP and have the audio remoted to the RDP client and still be able to use MagicJack via the telephone attached to the RDP server ?

Jenny: Tom, please do hold while I double check this for you.

Jenny: Tom, thank you for patiently waiting. I am sorry that is not possible as of the moment.

tom: "At the moment" ; does that mean that the MagicJack functionality will be changed to support this ... soon ?

Jenny: Yes, it will be supported soon.

tom: Time frame ?

Jenny: I am sorry we don't have time frame yet.

tom: Please ask for projected release date and put this info in a FAQ article at http://magicjack.com . Thanks.

Jenny: You are welcome

Jenny: Is there anything else I may help you with today?

tom: No. Thank you for your help. Goodbye.

Jenny: You are welcome

Jenny: Thank you for stopping by to chat, I hope I did a good job at addressing your concerns. Please take a second to answer a one question survey about the service I provided. Please click the "close" button on the top right of this screen and the survey will appear. Thanks again!

Jenny: Have a great day!
Back to top
View user's profile Send private message
Delta-9
MagicJack Contributor


Joined: 16 Jul 2008
Posts: 57

PostPosted: Sat Jul 26, 2008 9:38 pm    Post subject: Reply with quote

Does anyone have a copy of this file http://upgrade.talk4free.com/upgrade/20071214000001/upgrade.exe .

When I download it the link above, it does not even run on my thinner. It gives me an incompatible operating system message and references this webpage: http://www.magicjack.com/requirements/

Using the 1221000001 file produces the dreaded "No Audio Devices" message. I wonder what happened between the time you guys all downloaded the 12140000001 file and when I download (today) and ran it.
Back to top
View user's profile Send private message
jagpr
MagicJack Newbie


Joined: 02 Aug 2008
Posts: 6

PostPosted: Mon Aug 04, 2008 6:57 pm    Post subject: Reply with quote

i just configured my t5710 with 512/512 from scratch added the directX and still get the audio error. any help?

Jose
Back to top
View user's profile Send private message
lymon
Dan isn't smart enough to hire me


Joined: 31 May 2008
Posts: 164

PostPosted: Mon Aug 04, 2008 7:08 pm    Post subject: Reply with quote

jagpr wrote:
i just configured my t5710 with 512/512 from scratch added the directX and still get the audio error. any help?

Jose


Did you run dxdiag?
Back to top
View user's profile Send private message
jagpr
MagicJack Newbie


Joined: 02 Aug 2008
Posts: 6

PostPosted: Mon Aug 04, 2008 8:12 pm    Post subject: Reply with quote

Yes, when I run DXDIAG it runs. Is there something I need to do on there to make the MJ work?
Back to top
View user's profile Send private message
lymon
Dan isn't smart enough to hire me


Joined: 31 May 2008
Posts: 164

PostPosted: Tue Aug 05, 2008 12:12 am    Post subject: Reply with quote

jagpr wrote:
Yes, when I run DXDIAG it runs. Is there something I need to do on there to make the MJ work?


I'm not sure what about running dxdiag makes a difference. I was having the same problem as you with a 5700 when I read about dxdiag. My thought was "yeah right", but curiously after I went thru the entire dxdiag routine running all of the diag tests one after the other, did a commit and restarted, much to my amazement, no more message and MJ updates freely now.

You did commit and restart after running dxdiag, right?
Back to top
View user's profile Send private message
jagpr
MagicJack Newbie


Joined: 02 Aug 2008
Posts: 6

PostPosted: Tue Aug 05, 2008 9:31 am    Post subject: Reply with quote

Actually I don't think I did. I ran it just to make sure that Direct X intalled but did't pay attention to it. I will try that today when I get home. Should I just let it run and do its thing and then comit?

Jose
Back to top
View user's profile Send private message
HolmanGT
MagicJack Sensei


Joined: 08 Jan 2008
Posts: 1127
Location: Saint George, UT

PostPosted: Tue Aug 05, 2008 10:46 am    Post subject: Reply with quote

as lymon said,

DirectX - install - commit - run the dxdiag diagnostics. all the steps are crucial or it will just sit there and stare at you.
Back to top
View user's profile Send private message
jagpr
MagicJack Newbie


Joined: 02 Aug 2008
Posts: 6

PostPosted: Tue Aug 05, 2008 4:56 pm    Post subject: Reply with quote

Thanks guys, it worked great.//

Jose
Back to top
View user's profile Send private message
GuyOnTheAir
Dan isn't smart enough to hire me


Joined: 11 Feb 2008
Posts: 328
Location: Greater Los Angeles, CA

PostPosted: Fri Aug 08, 2008 2:50 pm    Post subject: Reply with quote

Stewart wrote:
I don't have a thin client, so can't troubleshoot the problem.

However, this may work to downgrade:
1. Kill MJ app.
2. Get the old version from http://upgrade.talk4free.com/upgrade/20071214000001/upgrade.exe .
3. Rename (or otherwise save and delete) the mjusbsp folder, typically C:\Documents and Settings\username\Application Data\mjusbsp .
4. Save and delete any files in C:\Documents and Settings\username\Local Settings\Application Data\magicJack\UpdateDownload .
5. Add a hosts file entry:
Code:
0.0.0.0 upgrade.talk4free.com
Of course, you will have to remove this entry if you need to download other updates.
6. Flush DNS cache.
7. Run the upgrade file.
8. Registration screen will appear. If if says 'no serial number passed', hit cancel and double click the status area. Repeat a couple of times if needed, until phone # appears.
9. Enter user name and password.
10. With luck, it will show Ready to Call.


Stewart,

On my Thin Client, I've done these steps, (there was no folder in step 4), and it still shuts down immediately and upgrades. I have no idea where it is getting the upgrade files from. Very frustrating...

Do I need to add DirectX to my installation? I haven't heard about this DXDIAG until here, and it isn't telling me even what it is...


Last edited by GuyOnTheAir on Fri Aug 08, 2008 3:00 pm; edited 1 time in total
Back to top
View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger
vinoy
MagicJack Newbie


Joined: 11 May 2008
Posts: 9
Location: Greenville, NC

PostPosted: Fri Aug 08, 2008 2:57 pm    Post subject: Reply with quote

Check that folder in your RamDrive (may be ZSmile
Back to top
View user's profile Send private message
GuyOnTheAir
Dan isn't smart enough to hire me


Joined: 11 Feb 2008
Posts: 328
Location: Greater Los Angeles, CA

PostPosted: Fri Aug 08, 2008 6:58 pm    Post subject: Reply with quote

You rock. That was it. I feel dumb for not thinking of it sooner.

Got it all working. I'm so excited! Smile
Back to top
View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger
pnbalaji
MagicJack Newbie


Joined: 18 May 2009
Posts: 1
Location: Dodgeville, WI

PostPosted: Mon May 18, 2009 4:17 pm    Post subject: Reply with quote

Stewart wrote:
I don't have a thin client, so can't troubleshoot the problem.

However, this may work to downgrade:
1. Kill MJ app.
2. Get the old version from http://upgrade.talk4free.com/upgrade/20071214000001/upgrade.exe .
3. Rename (or otherwise save and delete) the mjusbsp folder, typically C:\Documents and Settings\username\Application Data\mjusbsp .
4. Save and delete any files in C:\Documents and Settings\username\Local Settings\Application Data\magicJack\UpdateDownload .
5. Add a hosts file entry:
Code:
0.0.0.0 upgrade.talk4free.com
Of course, you will have to remove this entry if you need to download other updates.
6. Flush DNS cache.
7. Run the upgrade file.
8. Registration screen will appear. If if says 'no serial number passed', hit cancel and double click the status area. Repeat a couple of times if needed, until phone # appears.
9. Enter user name and password.
10. With luck, it will show Ready to Call.


Hi,

I got my magicjack yesterday and I am getting the error message "No Serial Number Passed". I googled the issue and found this topic. However, the link given in the above message is not active.

Can some one point me the correct link for this downgrade client?

Thanks,
Balaji.
Back to top
View user's profile Send private message Yahoo Messenger
ninjaxor
MagicJack Newbie


Joined: 20 May 2009
Posts: 1

PostPosted: Wed May 20, 2009 1:07 am    Post subject: Re: From MJ tech support ... Reply with quote

mobybit wrote:
Just had this chat with MJ tech support :

Please wait for a site operator to respond.

All operators are currently assisting others. Thanks for your patience. An operator will be with you shortly.

All operators are currently assisting others. Thanks for your patience. An operator will be with you shortly.

You are now chatting with 'Dana'

Dana: Hello, how may I help you?

tom: hello

tom: Why can't I select "Telephone" in the MagicJack menu "Volume/Headset control", "Choose your device" ?

Dana: Please wait while I check that for you

Dana: Please click the link to download and run the magicJack upgrade (applicable for both XP & Vista):

Dana: http://upgrades.magicjack.com/upgrade/upgrade.exe

Dana: ANd then

Dana: On your softphone, please click on Menu then Advance Users then Restart. After that, please unplug your magicJack then plug it back in after 15 seconds.

tom: Already ran the upgrade.exe and restarted MagicJack softphone.

Dana: ok

Dana: Please go to �My computer� and locate the drive named Vista Only, Phone, or removable disk (make sure it is the magicJack drive). Right click that drive, click format, and click start. Unplug magicJack, wait 15 seconds, and plug magicJack back in. You will need to download the magicjack upgrade again.

tom: I actually found out the solution after Googling for help.

Dana: Please plug in your MJ into USB port and then try the above step '

tom: The answer is that since I'm using RDP I have to have �Remote computer sound� set to �Leave at remote computer� in the Remote Desktop Connection properties �Local Resources� tab.

Dana: Thank you for your patience. I will transfer you to a higher level of support. Please hold while I transfer you.

Please wait while I transfer the chat to the best suited site operator.

You are now chatting with 'Jenny'

Jenny: Hi Tom!

tom: hello

Jenny: Please do allow me to review your previous chat session.

tom: ok

Jenny: Tom, may I know if you can select Telephone now please?

tom: Yes, after setting the proper options in the RDP client

tom: So, is there a way to use RDP and have the audio remoted to the RDP client and still be able to use MagicJack via the telephone attached to the RDP server ?

Jenny: Tom, please do hold while I double check this for you.

Jenny: Tom, thank you for patiently waiting. I am sorry that is not possible as of the moment.

tom: "At the moment" ; does that mean that the MagicJack functionality will be changed to support this ... soon ?

Jenny: Yes, it will be supported soon.

tom: Time frame ?

Jenny: I am sorry we don't have time frame yet.

tom: Please ask for projected release date and put this info in a FAQ article at http://magicjack.com . Thanks.

Jenny: You are welcome

Jenny: Is there anything else I may help you with today?

tom: No. Thank you for your help. Goodbye.

Jenny: You are welcome

Jenny: Thank you for stopping by to chat, I hope I did a good job at addressing your concerns. Please take a second to answer a one question survey about the service I provided. Please click the "close" button on the top right of this screen and the survey will appear. Thanks again!

Jenny: Have a great day!


Thanks mobybit! This solved my problem. phoneservicesupport.com rocks
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    magicJack and magicJack Plus Support, Reviews, FAQs and Hacks Forum Index -> Using magicJack on a Thin Client All times are GMT - 4 Hours
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB Turbo Extended Edition © 2010, phpBB Group