View previous topic :: View next topic |
Author |
Message |
dvdrus MagicJack Newbie
Joined: 18 Mar 2008 Posts: 5
|
Posted: Tue Mar 25, 2008 9:14 am Post subject: ATA device |
|
|
hey guys,
Just unlocked m y RTP300 from vonage and I do have my sip credentials.
I am having trouble configuring the ata
Has anyone configured this ata to run with sip credentials let me know |
|
Back to top |
|
|
Stewart Dan Should Pay Me
Joined: 13 Nov 2007 Posts: 663
|
Posted: Tue Mar 25, 2008 12:02 pm Post subject: |
|
|
I have not used this device, but I believe it's very similar to other Linksys/Sipura units.
Here are basic settings. These values are examples -- of course, use your actual values.
Proxy: proxy1.stlouis.talk4free.com:5070
Outbound Proxy: <leave blank>
Use Outbound Proxy: no
Display Name: John Doe
User ID: E212867530901
Password: SECRETPW20CHARACTERS
Auth ID: E212867530901
If the above does not help, verify that a PC connected to a LAN port can access the Internet. If not, fix that first.
If your device is behind another router, try connecting it directly to your DSL modem.
If still no luck, provide details on your config (modem, other router, etc.) and state precisely what is going wrong.
Note that this usage is presently not permitted by the TOS, although MJ stated that a BYOD option would be available this month. |
|
Back to top |
|
|
dvdrus MagicJack Newbie
Joined: 18 Mar 2008 Posts: 5
|
Posted: Tue Mar 25, 2008 5:42 pm Post subject: almost |
|
|
Ok here's my setup
MOdem Cable to rtp300
I entered all the info you said and i finally got it to register i get dial tone but when i make a call it just rings for about 2 mins then stops. called my cell btw. it worked once. another thing i notice is that whe ni dial a number takes a while (20 sec) before i hear it dialing |
|
Back to top |
|
|
kumar Dan Should Pay Me
Joined: 15 Nov 2007 Posts: 806
|
Posted: Tue Mar 25, 2008 9:12 pm Post subject: |
|
|
Stewart wrote: | I have not used this device, but I believe it's very similar to other Linksys/Sipura units.
Here are basic settings. These values are examples -- of course, use your actual values.
Proxy: proxy1.stlouis.talk4free.com:5070
Outbound Proxy: <leave blank>
Use Outbound Proxy: no
Display Name: John Doe
User ID: E212867530901
Password: SECRETPW20CHARACTERS
Auth ID: E212867530901
If the above does not help, verify that a PC connected to a LAN port can access the Internet. If not, fix that first.
If your device is behind another router, try connecting it directly to your DSL modem.
If still no luck, provide details on your config (modem, other router, etc.) and state precisely what is going wrong.
Note that this usage is presently not permitted by the TOS, although MJ stated that a BYOD option would be available this month. |
dude why ya post all your sip info?
Kumar |
|
Back to top |
|
|
newwonder01 magicJack Apprentice
Joined: 02 Feb 2008 Posts: 21
|
Posted: Tue Mar 25, 2008 10:07 pm Post subject: |
|
|
My friend,
can you tell me how did you get the SIP information for your MJ. |
|
Back to top |
|
|
dvdrus MagicJack Newbie
Joined: 18 Mar 2008 Posts: 5
|
Posted: Tue Mar 25, 2008 10:11 pm Post subject: lol |
|
|
ummmm he's not posting info if you can see |
|
Back to top |
|
|
leons MagicJack Contributor
Joined: 17 Mar 2008 Posts: 71
|
Posted: Tue Mar 25, 2008 11:28 pm Post subject: |
|
|
newwonder01 wrote: | My friend,
can you tell me how did you get the SIP information for your MJ. |
If he tells you he might have to shoot you! |
|
Back to top |
|
|
MagicHack Dan isn't smart enough to hire me
Joined: 12 Nov 2007 Posts: 241
|
Posted: Wed Mar 26, 2008 9:27 am Post subject: |
|
|
kumar wrote: | Stewart wrote: | I have not used this device, but I believe it's very similar to other Linksys/Sipura units.
Here are basic settings. These values are examples -- of course, use your actual values.
Proxy: proxy1.stlouis.talk4free.com:5070
Outbound Proxy: <leave blank>
Use Outbound Proxy: no
Display Name: John Doe
User ID: E212867530901
Password: SECRETPW20CHARACTERS
Auth ID: E212867530901
If the above does not help, verify that a PC connected to a LAN port can access the Internet. If not, fix that first.
If your device is behind another router, try connecting it directly to your DSL modem.
If still no luck, provide details on your config (modem, other router, etc.) and state precisely what is going wrong.
Note that this usage is presently not permitted by the TOS, although MJ stated that a BYOD option would be available this month. |
dude why ya post all your sip info?
Kumar |
That's not his SIP info... It's Jenny's. |
|
Back to top |
|
|
dvdrus MagicJack Newbie
Joined: 18 Mar 2008 Posts: 5
|
Posted: Wed Mar 26, 2008 10:14 am Post subject: help |
|
|
Stewart any idea's why it's not allowing me to call or rec calls. I can make a call like once ever 10 attempts. I get dial tone. |
|
Back to top |
|
|
Stewart Dan Should Pay Me
Joined: 13 Nov 2007 Posts: 663
|
Posted: Wed Mar 26, 2008 11:04 am Post subject: |
|
|
Codec should be G711U.
Anything to do with STUN or NAT should be off.
If no luck, post all your settings (advanced) (mask personal info), also what kind of modem do you have?
If still no luck, you'll have to use SIP debug or capture traffic to see what's going wrong.
Have you been able to make this device work with other providers? |
|
Back to top |
|
|
dvdrus MagicJack Newbie
Joined: 18 Mar 2008 Posts: 5
|
Posted: Wed Mar 26, 2008 11:45 am Post subject: ok |
|
|
stun server is off so is nat.
when i get home i will save screen shots of my settings.
i have provisioning set to off aswell. do i have to do anything with xml file? I have my decrypted one.
not sure because i did flash it with newer firmware |
|
Back to top |
|
|
nomad4x MagicJack Newbie
Joined: 24 Jan 2008 Posts: 1
|
Posted: Tue Apr 01, 2008 10:00 pm Post subject: |
|
|
Can someone out there PM me and tell me how you decrypt your 20 character password. I don't have enough CPU power to do that... |
|
Back to top |
|
|
Bendle Dan isn't smart enough to hire me
Joined: 27 Mar 2008 Posts: 103 Location: proxy1.nashville.talk4free.com
|
Posted: Tue Apr 01, 2008 10:16 pm Post subject: |
|
|
MagicHack wrote: |
That's not his SIP info... It's Jenny's. |
For a good time, for a good time call....... |
|
Back to top |
|
|
eggsped MagicJack Newbie
Joined: 10 Dec 2007 Posts: 1
|
Posted: Wed Apr 02, 2008 12:51 pm Post subject: |
|
|
MagicHack wrote: | kumar wrote: | Stewart wrote: | I have not used this device, but I believe it's very similar to other Linksys/Sipura units.
Here are basic settings. These values are examples -- of course, use your actual values.
Proxy: proxy1.stlouis.talk4free.com:5070
Outbound Proxy: <leave blank>
Use Outbound Proxy: no
Display Name: John Doe
User ID: E212867530901
Password: SECRETPW20CHARACTERS
Auth ID: E212867530901
If the above does not help, verify that a PC connected to a LAN port can access the Internet. If not, fix that first.
If your device is behind another router, try connecting it directly to your DSL modem.
If still no luck, provide details on your config (modem, other router, etc.) and state precisely what is going wrong.
Note that this usage is presently not permitted by the TOS, although MJ stated that a BYOD option would be available this month. |
dude why ya post all your sip info?
Kumar |
That's not his SIP info... It's Jenny's. |
That's funny!!!
Anyway, I just purchased a PAP2 (V.1) on closeout from Staples and am trying to figure out if I can make it work with my MJ. Is it worth the effort or should I return it and get my $20 back?
Thanks |
|
Back to top |
|
|
Stewart Dan Should Pay Me
Joined: 13 Nov 2007 Posts: 663
|
Posted: Wed Apr 02, 2008 1:42 pm Post subject: |
|
|
If it's unlocked, very little effort should be needed to set it up.
If you need to unlock it, searching http://www.dslreports.com/forum/voip will likely find a useful thread. In some cases, it's a lot of work. It may be less work if you unlock it before connecting it to the Internet. |
|
Back to top |
|
|
|